3D Design and 3D Printing

 Explore the Lunar Prototypes journey through 3D design and 3D printing. 

We will explore everything from software to nozzle temperatures, and everything in between. 

Comments

Post a Comment

Popular posts from this blog

Original 3D Printing Setup for Lunar Prototypes

Image
I wanted to write about where I'm at from a 3D printing perspective when I'm starting this venture so I can look back upon it fondly one day and see if anything has changed. In this post I'm going to detail my current 3D printing setup, slicing software I use, and where I hope to go.  As I wrote this post, I was reminded of every single recipe article on the planet that has like six hours of narrative before you finally scroll to the recipe, so in an effort to break that trend, I'm going to BLUF (Bottom Line Up Front) this.  BLUF Recommendations This is my current recommendation for mods. Note, this will absolutely change as I learn and grow. But it's worked for me to this point.  Current Printer: Ender 3v2  Current Mods:  Ferrule Crimped Power Supply Leads PEI Print Bed Silicone Bed Springs Red Bed Leveling Wheels Briss Printer Duct Voron M4 Extruder Klipper running on a Raspberry Pi CR Touch Tested Mods: Cable Chains Dual Gear Extruder Current Slicing Software...
Read more

Sometimes You Need a Thing

Image
Necessity is the mother of invention. -Proverb This is a story about solving a simple problem with a lot of technology. What could have been a makeshift workaround became something different. I don't know if we've coined a phrase for it yet, but we probably should.  That being said, this story is for entertainment purposes only, and designs associated with this story are to be used only at your own risk.  Unforeseen Problems The story goes like this. I inherited a vehicle rooftop storage box from my father. For weeks after getting it, we'd been planning a trip where we intended to use it, so we'd already been planning all of our packing around having it.  Being foolish, I automatically assumed it'd fit the stock roof aero cross bars on my wife's car. Being an engineer, I vowed to test this well before we attempted to make a trip with it. Being a father, I didn't get to the test phase until the night before the trip. Immediately upon getting the box on the ro...
Read more

Sustainability Tips for 3D Printing

Image
Since I started 3D printing, reducing waste has been a key focus for me. It's beneficial for the environment and cost-effective, making it a win-win situation. In this post, I'll share some practical tips that I've gathered for reducing filament usage in both the printing and design processes. Additionally, I'll highlight areas where I'm seeking further advice and invite the community to share their insights. Printing Tips  As much as I want 3D printing to be the sustainable solution to reducing waste in manufacturing, the reality is 3D printing can be very wasteful. There are a number of necessary evils. Skirts, supports, purge lines, wipe towers. Not to mention failed prints, poorly designed prints, or unnecessary prints.  Here are a few strategies I've been using for reducing the waste during the printing process and a few areas that I'd love some feedback on. Skirts and Purge Lines:   While skirts and purge lines can seem wasteful, they often prevent fai...
Read more